DPJ Flexible Conduit Connector
video

DPJ Flexible Conduit Connector

The DPJ flexible conduit pipe connector is made from zinc alloy, this kind of material is often die-cast with galvanized surface treatment.
Send Inquiry
Product Introduction
Flexible conduit connector photo
DPJ connector photo
DPJ conduit connector photo
DPJ Flexible conduit connector photo
DPJ Flexible conduit connector picture
DPJ photo

Material

 

The DPJ flexible conduit pipe connector is made from zinc alloy, this kind of material is often die-cast with galvanized surface treatment.

 

Size

 

There are many different sizes in order to fit different conduit diameters, but normally, there are following common size:

  • DPJ-12 = 3/8"
  • DPJ-16 = 1/2"
  • DPJ-20 = 3/4"
  • DPJ-25 = 1"
  • DPJ-32 = 11/4"
  • DPJ-38 = 11/2"
  • DPJ-51 = 2"

 

Usage

 

Its main usage is to connect flexible metal conduit with electrical boxes, panels, or enclosures. And then, it can offer a secure, sealed, and protected termination point for electrical wiring. It is mainly used in residential, commercial, and industrial electrical installations.

 

Table of Key Specifications

 

Below is a table of the key specifications

 

Attribute

Value

Product Name

DPJ Flexible Conduit Box Connector Metal Hose End Style Straight Joint

Main Usage

Connect flexible metal conduit to electrical boxes/panels

Material (Body)

Zinc Alloy, Galvanized

Additional Components

Nitrile Rubber (Gasket), Iron (Screw, likely)

Size Range

1/4" to 2" (e.g., 1/2", 3/4" common)

Protection Classification

IP65 (in some models)

Thread Specification

NPT, Metric, PG

Applications

Residential, Commercial, Industrial

 

Structure

 

1. Main Body:

  • Material: Zinc alloy, die-cast, often with a galvanized finish.
  • Design: A straight, cylindrical or hexagonal body with a male-threaded end.

2. Clamping Mechanism:

  • Material: iron, possibly galvanized or treated for rust resistance.
  • Design: a set screw or compression ring integrated into the body.

3. Gasket or Seal:

  • Material: Nitrile rubber (NBR), known for resistance to oil, water, and chemicals.
  • Design: A ring or washer-like component, likely positioned inside the connector where the conduit enters or at the threaded end, to seal against moisture and dust.

4. Hose Sleeve or Insert (Optional):

  • Material: Likely part of the zinc alloy body or a separate insert.
  • Design: A sleeve or flared end that aligns and grips the flexible conduit, offer a tight connection.

Hot Tags: dpj flexible conduit connector, China dpj flexible conduit connector manufacturers, suppliers, factory, DGJ Flexible Conduit Pipe Connector, DKJ Flexible Conduit Pipe Connector, DPJ Flexible Conduit Connector, DPN Flexible Conduit Pipe Connector, flexible metal conduit connectors

Send Inquiry

whatsapp

Phone

E-mail

Inquiry