Tips for using metal hose machine mainly include the following aspects:
Precautions for installation:
Avoid heat source: The layout of metal hose should be kept away from heat source as far as possible, especially high temperature areas such as engine exhaust pipe. If necessary, waterproof sleeve or protective screen can be used to prevent metal hose from deteriorating due to overheating.
Prevent friction: In areas where metal hose may rub against the surface of equipment, protective equipment such as hose clamps or springs should be used to prevent damage to the hose surface.
Bending radius: When bending, the bending radius of metal hose should not be too small and should exceed 9 times the diameter. There should be a parallel line segment of more than 2 times the diameter of the pipe at the junction of the hose and the connector.
Avoid excessive stretching: Avoid keeping the metal hose in a taut state during installation, and keep it loose even in the absence of relative movement. The stretched metal hose will expand under working pressure, resulting in reduced strength.
Avoid twisting: Do not twist the hose during installation. Slight twisting will also reduce its strength and may cause the joint to loosen.
Maintenance and Care:
Regular Inspection: If the metal hose is installed on the core component, it is recommended to check or replace it regularly to ensure its performance and safety.
Joint Installation Method:
Cleaning and Cutting: Before connecting, use a cleaning agent to thoroughly clean the inside and outside of the metal hose to ensure that no impurities remain. Use a suitable cutting tool to cut the metal hose to the appropriate length.
Installation of the Joint: Install the joint on the metal hose and select the appropriate thread specification and model as needed. Adjust the joint angle to ensure that it is connected correctly with other equipment. Use a wrench or other tool to fix the joint and check whether it is tightened firmly.
By following these usage tips and maintenance recommendations, you can effectively extend the service life of the metal hose and ensure its performance and safety.
